GelDoc-It™ TS Imaging System Installation and User Instructions UVP, LLC Ultra-Violet Products Ltd. 2066 W. 11th Street Unit 1, Trinity H
GelDoc-It TS Imaging System 10 Adjusting the Screen Angle 1. To adjust the angle of the screen, loosen the knobs on each side of the monitor. T
GelDoc-It TS Imaging System 11 Operating VisionWorks Software (When Using the Motorized Lens) The system will go through the boot-up process. Lau
GelDoc-It TS Imaging System 12 Image Focusing With the Manual Lens Prior to capturing any images, prepare the image focus capabilities of the syst
GelDoc-It TS Imaging System 13 TroubleShooting No Power to the Darkroom Recheck main power cord connections to the GelDoc-It TS darkroom. Check
GelDoc-It TS Imaging System 14 Technical Support UVP offers technical support on all of its products. If you have any questions about the product
GelDoc-It TS Imaging System 2 Introduction The GelDoc-It TS System is designed as a self-contained imaging system with a built-in computer, no ext
GelDoc-It TS Imaging System 3 Camera GelCam 310 Camera, CCD monochrome model with a resolution of 1600 x 1200 with a USB 2.0 PC interface. All
GelDoc-It TS Imaging System 4 Printer UV Lamp UV/White Converter Plate Optional Equipment Refer to the ordering information section of this
GelDoc-It TS Imaging System 5 Set-up Instructions Components Camera with zoom lens, bracket, filter, cables GelDoc-It TS darkroom Window
GelDoc-It TS Imaging System 6 Camera Set-up Manual Lens Configuration The camera, zoom lens, and diopter are assembled at the UVP factory
GelDoc-It TS Imaging System 7 Motorized Lens Configuration The camera, zoom lens, and diopter are assembled at the UVP factory. Remove the cap fro
GelDoc-It TS Imaging System 8 5. Mount the lens control box on the hook located at the back of the darkroom. 6. Plug in the serial cable from th
GelDoc-It TS Imaging System 9 Connecting the Power Cables Inside the darkroom, place the transilluminator on the tray and connect the transillu
Commenti su questo manuale